POWAIR TACTICAL LINE 0,25L/16CI MAGFED HP (300 BAR)

PowAir TACTICAL Line Composite HP System with a filling volume of 16ci / 0.25L and a working pressure of 300 bar / 4500 PSI. The bottle is equipped with a PowAir MaxReg regulator. This is adjustable in the outlet pressure and offers some interesting features as standard, such as double O-rings, filling nipples with microfilter, pressure reduction using shims (more constant than springs!) and much more.

The TACTICAL Line bottle has been specially developed for use in the MagFed area. With its 50mm diameter, it fits into any standard Air-Stock shoulder rest. Due to the higher filling pressure and the 0.25L volume, you can fire up to 60% more shots with this bottle than with conventional 200 bar aluminum systems of the same size.

Due to the area of application in the MagFed Sport, the bottle is kept in tactical black on the outside.

The bottle is compatible with all standard 300 bar / 4500 PSI paintball HP regulators.

Compared to other 0.25L 300 bar bottle models on the market, the new PowAir Tactical Line bottle is 2cm longer, but 10% lighter with the same volume.

Product details of the PowAir TACTICAL Line 0.25L HP System:

- Length: 27cm

- Diameter: 50mm

- Weight: 380g (bottle + regulator)

- Volume: 0.25 liters / 16ci

- Inflation pressure: 300 bar / 4500 PSI

- Burst pressure 450 bar / 6750 PSI

MAXREG HP regulators offer high-end product features and top quality at an incredibly good price. All regulators are tested to the PI and thus withstand the highest European test standards.

The list of product features is long, among other things, the PowAir MAXREG regulator has a double set of O-rings on the threaded neck for improved tightness on the ASA. The color of the O-rings is also adapted to the working pressure of the regulator.

ORANGE = 300 bar / 4500 PSI regulator

GREEN = 200 bar / 3000 PSI regulator

Inside, this regulator works with shims (most regulators use springs these days), these are not only more constant in the working pressure, but also offer a constant working pressure for much longer because they practically do not wear out. By removing the shipms, the working pressure of the regulator can also be set to 450 PSI (remove 3 shims), 600 PSI (remove 2 shims) or 850 PSI (series construction). So you have everything from LP to HP Regulator in one product.

Other features are the filling nipple with integrated micro filter against dirt particles and the 20mm micro pressure gauge with PowAir logo. Like all burst disks, both are also kept in an attractive AllBlack finish (black), which gives the regulator a great look.

A colour-coordinated filling nipple protection and a protective thread cap for transport round off the package.

A really excellent overall package and at a price for which you can hardly get a cheap standard regulator. For us, it is therefore clearly the currently best product in terms of price-performance ratio.

Product details of the PowAir MAXREG 300 Bar HP Regulator:

- High quality materials

- PI tested for maximum security

- Working pressure 300 bar / 4500 PSI

- Standard outlet pressure 800 PSI / 50 Bar (HP) - Adjustable!

- Double colored ASA O-rings

- Filling nipple with micro filter (black)

- 20mm micro pressure gauge with PowAir logo

- Black burst disks as standard

- Filling nipple protection (rubber)

- Thread protection cap (plastic)

- Supplied in a sturdy, printed box